GHPNA-4 TECHNICALS
Bandpass
Frequency
MHz
|
Port to
Port
Isolation
|
Output
Return
Loss
|
Input
Return
Loss
|
Insertion
Loss
|
4-1500
|
12.0dB
|
12dB
|
12dB
|
12.0dB
|
Characteric Impedance Input;
|
93 ohms
|
Characteric Impedance Outputs;
|
75 ohms |
Housing Material:
|
Die-cast Tin Plated
|
Item Weight:
|
|
2.1 ounces
|
|
NOTE: DEVICE IS NOT AC/DC POWER PASSING
|
Specifications subject to change without notice.
|
|
|
PRODUCT DESCRIPTION:
The Holland GHPNA-4 Series Splitter has been specifically designed to work in HomePNA environments. The low port to port isolation allows HPNA communication signals to pass through the splitters to set top boxes with as little signal loss as possible. At the same time, the GHPNA Series Splitters provide good return loss and isolation for in band frequencies other than HomePNA
NOTE; The HomePNA 3.1 operational frequency spectrum is not compatable on the same coaxial cable media with DOCSISTM compliant cable modem appications.
The device therefore can allow the distribution of HomePNA data transmission technology throughout a dwelling utilizing the existing coaxial media wiring.
PRODUCT STANDARD FEATURES:
Design allows co-existance of Cable TV type programming, networked DVRs & computer accessories over the HomePNA network stacked on the same coaxial cable.
Standard broadband cable TV splitters have an operational bandwidth from 5-1000Mhz. HomePNA home networking operational frequencies are 4-31MHZ. The extended lower bandwidth frequency designed into the IPTV splitters allowing data streams to transmit and receive in a protected lower frequency band.
Round center conductor siezing pins with white insulators contained in the SCTE compliant F ports
Tin-plated, zinc die-cast housing with soldered back plate provides -110dB of RFI. All are highly precision machined with SCTE compliant threading and are spaced on 1" centers.
All ports are water sealed and have be tested to withstand 30 psi of internal pressure. All ports comply to all existing SCTE standards.
Built-in NPO capacitors on all ports. All components are temperature hardened. Devices designed to remain stable in enviroments of -40 to +85o C and maintain all technical specifications.
|
|
|
|
|
|
|