Home Networking Depot
Bonding the family dwelling through technology

www.JustAnswer.com




Holland A BELDON Brand logo
Title Holland Electronics GHPNA-6 Splitter

Image Holland Electronics GHPNA-6 HPNA-2 Splitter


GHPNA-6 TECHNICALS
Bandpass
Frequency
MHz
Port to
Port
Isolation
Output
Return
Loss
Input
Return
Loss
Insertion
Loss

4-1500

15..0dB

12dB

12dB

15.0dB

Characteric Impedance Input;
93 ohms

Characteric Impedance Outputs;
75 ohms

Housing Material
Die-cast Tin Plated

Item Weight:
4.1 ounces
NOTE: DEVICE IS NOT AC/DC POWER PASSING

ADVERTISEMENT

MICROSOFT OFFER
Military Members & Family Save 10% Everyday
Dimensions of GHPNA-6

Link to GHPNA Tech Specs

Specifications subject to change without notice.

PRODUCT DESCRIPTION:

The Holland GHPNA-6 Series Splitter has been specifically designed to work in HomePNA environments. The low port to port isolation allows HPNA communication signals to pass through the splitters to set top boxes with as little signal loss as possible. At the same time, the GHPNA Series Splitters provide good return loss and isolation for in band frequencies other than HomePNA

NOTE; The HomePNA 3.1 operational frequency spectrum is not compatable on the same coaxial cable media with DOCSISTM compliant cable modem appications.

The device therefore can allow the distribution of HomePNA data transmission technology throughout a dwelling utilizing the existing coaxial media wiring.


PRODUCT STANDARD FEATURES:

Design allows co-existance of Cable TV type programming, networked DVRs & computer accessories over the HomePNA network stacked on the same coaxial cable.

Standard broadband cable TV splitters have an operational bandwidth from 5-1000Mhz. HomePNA home networking operational frequencies are 4-31MHZ. The extended lower bandwidth frequency designed into the IPTV splitters allowing data streams to transmit and receive in a protected lower frequency band.

Round center conductor siezing pins with white insulators contained in the SCTE compliant F ports

Tin-plated, zinc die-cast housing with soldered back plate provides -110dB of RFI. All are highly precision machined with SCTE compliant threading and are spaced on 1" centers.

All ports are water sealed and have be tested to withstand 30 psi of internal pressure. All ports comply to all existing SCTE standards.

Built-in NPO capacitors on all ports. All components are temperature hardened. Devices designed to remain stable in enviroments of -40 to +85o C and maintain all technical specifications.




12/21/2017