COAXIAL F CONNECTOR TORQUE INSTALLATION TOOL (created 1117)

CIT-1 installs and removes F connectors in high density and hard to reach locations, and is the only tool that works with bent coax. Unscrews tight connectors, provides a 30 in/lb tightening and loosening torque using only fingers. Prevents signal leakage and service calls from loose connections. Unlike other competitors less expensive knock-offs, Holland Electronic's patented CIT-1 uses a high density composite plastic with a hardened steel Hex insert. Features: Great for disconnecting tight connectors due to a bent cable Installs & Removes F-connectors Designed to slip over bent cable Holds connectors in place for insertion saves hand and protects fingers

Designed to install & remove all F style coaxial connectors with a 7/16" integrated hex nut.

HOLLAND ELECTRONIC CIT-1 CONNECTOR INSTALLATION TOOL

HOLLAND ELECTRONIC CIT-1
CONNECTOR TOOLAPPLICATION

	CIT-1 FEATURES High density composite plastic with a hardened steel 7/16" hex insert. Great for disconnecting tight connectors due to a bent cable. Installs & Removes F-connectors. Designed to slip over bent cable Holds connectors in place for insertion. Saves hand and protects fingers

	The patent pending PCT Indoor Torque Tool, PCT-TT, has been developed to be used on all consumer electronics devices within the home. These devices (i.e. television monitors, settop boxes, modems, and MTA’s) are typically terminated with “hand tightened” F-connectors. The female F-ports on such devices are not designed to withstand the excessive torque applied when using a wrench. Because of this, cable technicians and installers are advised not to wrench tighten connectors onto consumer electronics devices. Whether used by a cable technician or cable subscriber, the torque value achieved is consistently ideal for terminations to all consumer electronics devices. Eight to ten inch-pounds of torque is significantly better (shielding performance, signal loss) than “finger tight”, and will not result in damage to the female F-port.

PCT -TT CONNECTOR TORQUE TOOL

PCT -TT TORQUE TOOL APPLICATION

	PCT-TT FEATURES Tightens F-connectors to between 8 and 10 inch pounds of torque vs. finger tightening which typically produces just 1 to 3 in. lbs. of torque For use on all consumer electronics devices Infinite life cycle - tested and proven on thousands of rotations Glass filled nylon material “work hardens” with use- applied torque value does not decrease over time Reusable - not disposable • Eliminates damage to television / modem / set-top ports caused by overly tightened connectors Prevents signal loss, ingress / egress •

RETURN TO TOP

12/21/2017