HEC MSAT-4 MoCA enabling 4 output splitter (updated 0218)

Title Holland Electronics MSAT-4 MoCA Splitter

Image Holland Electronics MSAT-4 MoCA Splitter

**MSAT-4 TECHNICALS**
Frequency Bandpass	2 - 2150MHz
Insertion Loss
for 2-4MHz	11.0dB
for 4-475MHz	11.0dB
for 475-625MHz	9.0dB
for 625-950MHz	9.0dB
for 950-1820MHz	9.0dB
for 1820-2150MHz	9.5dB
In/Out Insertion Linearity
for 2-4MHz	±0.5dB
for 475-625MHz	±0.5dB
for 950-2150MHz	±2.0dB
Satellite any 36MHz BW	±0.5dB
Return Loss - Inputs
for 2-4MHz	9.0dB (Typ)
for 475-625MHz	9.0dB (Typ)
for 950-2150MHz	10.0dB (Typ)
Return Loss - Outputs
for 2-4MHz	9.0dB (Typ)
for 475-625MHz	12.0dB (Typ)
for 950-2150MHz	12.0dB (Typ)
Port to Port Isolation between Ports
for 2-4MHz (Max)	11.0dB
for 4-475MHz (Max)	18.0dB
for 475-625MHz	11.0±3.0dB
for 625-950MHz(Min/Max)	10dB/45dB
for 950-1820MHz	20.0dB
for 1820-2150MHz	15.0dB
Isolation Linearity Between Outputs
for 2-4MHz	±0.5dB
for 475-625MHz	±2.0dB
DC Power Pass
Round Pins w/White Insulators
Outport Port 1 to Input	1500mA Max
Other Output Ports	DC Blocked
Power Port Insulator Color	RED
Operational Temperture Range
	-34° to 60°C
	-29° to 140°F
Device weight & dimenisions

NOTE; MoCA^®Opertational frequency range is noted in RED TYPEFACE.

Specifications subject to
change without notice.

PRODUCT DESCRIPTION:

The MSAT Splitter Series was specifically designed to work in conjunction with DIRECTV's single wire multiswitch technology (SWM) within Commercial MDU applications.

Holland Electronics worked closely with DIRECTV's and the MoCA Alliance to develop a splitter with on-board MoCA capabilities. Used after a standard SWM module, or after DIRECTV's, new SWM-integrated dish, the MSAT Splitter Series allows you to split the outputs from these devices to provide signal to up to 4 satellite receivers. With sealed F-ports, performance-tested plating and rugged cases, the MSAT Splitter Series can be used indoors as well as in harsh outdoor environments.

ADVERTISEMENT

KEY PRODUCT BENEFITS:

High quality housing provides electrical and mechanical integrity under adverse conditions. HOLLAND's MSAT-# Series MoCA enabling splitters havea tin-plated, zinc die-cast housing with high precision machined SCTE compliant threaded ports spaced on one-inch centers. The soldered back and tin-plated, zinc die-cast backplate provide -110dB RFI.

The housing meets the requirements of ASTM B117-97 for 500 hours of electrostatic salt fog testing.

All F ports are water sealed to withstand up to 30 P.S.I. internal pressure, thereby providing long term water-tight integrity.

Highly reliability design provides electrical stability under adverse operating conditions. FR-4, PCB with micro strip design and SMT technology are implemented throughout the diplexer.

The input F port passes a 1kV 100a ring wave surge test (IEEEC62.41 Cat A3 standard).

Temperature-hardened components maintain temperature stability from -34° to 60°C ( -29° to 140°F).

MSAT-# series MoCA enabling splitters meet all applicable DirecTV and CEA standards in effect at the time of manufacturing, providing stable return loss, frequency band separation, flatness & RF performance.