Home Networking Depot
Bonding the family dwelling through technology


JustAnswer.com



title broadband sub premise amp















logo.Arris/Motorola
Title for Moto BDA-S1Subscriber Amplifier


MODEL# MOTOROLA BDA-S1

DESCRIPTION:

The BDA broadband telecommunications subscriber drop amplifier designed for customer premise amplifieration. These amplifiers can be used to compensate for excessive signal attinuation from long coaxial cable service drops and/or excessive signal splitting losses caused my multi-room installations.

FEATURES:

Includes; AC/DC 12 volt UL, Class 2 power transformer. 6kV surge protected (IEEE587 for category B3 devices).

Aluminum 360 die cast housing with RFI gaskets. Power coat baked in paint, provides for long enviromentally protection to the device.
Tongue & groove back plate design provides 100dB RFI. Designed for both indoor and outdoor applications

DOCSIS® 2.1DOCSIS® 2.1 (D2) & 3.0 (D3) cable modem compatible.

Local or remote DC powering via coaxial cable. Note; Require power inserter & coaxial jumper sold separatly.

Provides 15dB of forward gain from 54Mhz - 1Ghz. Passive return band 5-42Mhz (for proper cable modem operation).

Intergrated IC, GaAs FET, very low noise. Device typically used in satellite low noise LNBs.


ADVERTISEMENT

HelloTech


Surge withstanding in INPUT F PORT; 6kV, IEEE C62.41-1991, for category B3 combination wave. ALL OUTPUT, POWER INSERTING F PORTS; 6kV, IEEE C62.41-1991, for category A3 ring wave and 1kV combination wave.

Enviromentally harden blocking capacitors on all RF ports. Operating range -40 to +140°F. (-40° to +60° C)

Patented "Auto-Seize P-Series" F connectors that are
SCTE compliant. F-ports are made of machined brass and nickel plated. Device is water sealed and can withstand >15 PSI internal pressure to all F ports.


ADVERTISEMENT

Microsoft


Patent pending magnetic resistant ferrite cores provide excellent digital transport charteristics for video, data and telephony services.





Image of Arris Motorola BDA-S1 Drop Amplifier

BDA-S1 DEVICE PARAMETERS


Forward
Return
Notes
Bandpass
54-1002Mhz
5-42Mhz
Amplifier Type
GaAs FET
PASSIVE
1
Gain
+15.0dB
<1.5dB
2
Frequency Response
+/-0.8dB
+/-.5dB
Noise Figure
2.5dB
N/A
Input return Loss
>23.0dB
>18.0dB
3
Output Return Loss
>23.0dB
>18.0dB
4
Port to Port Isolation
N/A
-N/A
AMPLIFIER PERFORMANCE
Output ops RF levels (110ch 750MHz)
+24dBmv
N/A
5
Composite Triple Beat
-70.0dBc
N/A
5
Cross Modulation
-70.0dBc
N/A
5
Composite 2nd Order

-60.0dBc
N/A
5
Hum Modulation
-70.0dBc
N/A
GROUP DELAY CHARACTERISTICS
Group Delay
16/4/2
30/8/7/14
6/7
MECHANICALS
Operational Enviroment;
-40 to +140°F
(-40° to +60°C)
Powering Requirement;
12vdc @ 300mA
(3.0 watts)
Housing Dimensions;
4.0x4.9x1.1 in
(102x124x28mm)
Product Weight;
1.1 lb
(0.5kg)

Banner for product install

NOTES
1. Manufacturerd by Anadigics®
2. Includes the loss of internal diplex filters.
3. Measured on RF IN Port.
4. Measured on RF OUT Port.
5. 110 CW NTSC Channels loaded from 50-750Mhz. Digital carriers at -6dB as related to analogy channels. Bandwidth of placement 750- 870Mhz.
6. Forward; Chrominance to Luminance Delay (ns); 55.25Mhz, 67.35Mhz & 77.35Mhz.
7. Reverse; Group delay within 1.5Mhz bandwidth (ns)
@ 5.0Mhz, 8.5Mhz, 36.0Mhz & 39.0Mhz

Specifications subject to change without notice




Turn AC up & Electricity Costs down





6/24/2017